_1778553121707.webp)
Special Honeycomb Carbon for Spray Painting Rooms
Characteristics: Honeycomb structure, directional optimization of pore distribution, efficient adsorption capacity for VOCs such as benzene, esters, and ketones in spray painting exhaust gas, low airflow resistance, suitable for high air volume conditions in spray painting rooms, and long service life.
Instructions for use: Used in exhaust gas treatment systems for spray painting rooms such as automobiles and furniture, to remove organic waste gas and odors generated during the spray painting process.
Storage method: Sealed and stored in a dry environment, moisture-proof and dust-proof.
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
Special Honeycomb Carbon for Spray Painting Rooms
Our Special Honeycomb Carbon for Spray Painting Rooms delivers industrial-grade performance with proven results. Built with an upgraded macropore structure (>25% proportion), this arrangement accomplishes >33% adsorption capacity and keeps up outlet concentrations underneath 50mg/m³. With compressive quality surpassing 1.5MPa and weight drop beneath 380Pa, it bolsters tall straight speeds up to 1.2m/s. The honeycomb plan expands benefit life to 4-6 months in ordinary booth operations, lessening substitution recurrence by 50%. Supported by 60+ a long time of R&D encounter and 45,000-ton yearly generation capacity, we convey reliable quality that meets strict natural standards.
Why Your Spray Booth Needs Specialized Carbon Technology
Standard activated carbon often fails in spray painting environments. Why? Paint mist contains sticky particulates that clog ordinary carbon pores within weeks.
Your production can't afford frequent shutdowns.
That's where our product makes the difference. The directional pore optimization specifically targets benzene, toluene, ethyl acetate, and ketones—the exact VOCs your spray booth exhausts daily.
The Real Cost of Poor VOC Control
- Environmental penalties for exceeding emission limits
- Frequent carbon replacement shutting down production lines
- High energy bills from excessive fan load
- Worker complaints about paint odors
You need a solution that works continuously under real-world conditions.
How Our Technology Solves Your Paint Booth Challenges
Engineered for Paint Mist Environments
Unlike generic carbon, this product features pre-designed macropores that capture sticky paint particulates before they seal the surface. The 6% dust/mist capacity means your system keeps working even when paint overspray enters the exhaust stream.
Handles High Air Volumes Effortlessly
Your spray booth moves massive air volumes. Our honeycomb structure supports flow rates up to 1.2m/s without collapsing. The low airflow resistance (<380Pa) reduces strain on your exhaust fans, cutting electricity costs by up to 30%.
Extended Service Life = Less Downtime
With >33% adsorption capacity and iodine values between 600-800mg/g, you'll get 4-6 months of continuous operation. That's twice the lifespan of standard options, meaning fewer production interruptions.
Guaranteed Compliance
Meeting environmental regulations isn't optional. Our Special Honeycomb Carbon for Spray Painting Rooms consistently delivers outlet concentrations below 50mg/m³, keeping you compliant with the strictest emission standards.
Technical Specifications
| Parameter | Specification |
|---|---|
| Iodine Value | 600-800 mg/g |
| Compressive Strength | ≥85% (>1.5MPa) |
| Moisture Content | ≤10% |
| Ash Content | ≤8-12% |
| Methylene Blue Value | 80-120 mg/g |
| Specific Surface Area | 500-900 m²/g |
| Macropore Ratio | >25% |
| Pressure Drop | <380 Pa |
| Adsorption Capacity | >33% |
| Dust/Mist Capacity | 6% |
| Max Linear Velocity | 1.2 m/s |
Your Questions Answered
What makes this carbon "Specialized" for spray booths?
Spray booth exhaust contains both high-concentration VOCs and sticky paint mist. This product features an enhanced macropore structure (>25%) to provide a high "dust/mist capacity" of 6%, preventing the carbon from clogging prematurely. It ensures that your system meets environmental discharge limits (<50mg/m³) even under high-load spraying conditions.
How does it improve operational efficiency for automotive or furniture manufacturers?
By reducing the pressure drop to <380Pa, it significantly lowers the load on your exhaust fans, cutting electricity costs. Additionally, because its adsorption capacity is >33%, the frequency of stopping production to replace the carbon is reduced by 50%, leading to higher workshop throughput.
Does it require pre-filtration?
While it has a high tolerance for particulates (up to 100mg/m³), we recommend a dry-type filter or water curtain as a primary stage. This allows the product to focus on molecular VOC adsorption, maximizing its service life and ensuring zero environmental penalties.
How should I store unused carbon?
Keep it sealed in a dry environment. The product must remain moisture-proof and dust-proof. Proper storage maintains the adsorption performance until you're ready to install it.
Can you customize specifications for my specific application?
Absolutely. We offer full OEM/ODM customization—from pore structure to product dimensions. Our technical team can design a solution based on your air volume, VOC composition, and space constraints.
Fast Delivery When You Need It
We maintain tens of thousands of tons in stock across multiple production bases. Standard orders ship within 7-15 days. Need it urgently? We can arrange delivery in as fast as 3 days.
Our logistics network covers nationwide delivery in 3-7 days, with full tracking and protective packaging. International orders? We handle sea, air, and rail shipping with complete customs support.
Contact Us
Ready to upgrade your spray booth exhaust system? Email us at greta@carbonxinhua.com for technical consultation and Special Honeycomb Carbon for Spray Painting Rooms pricing.
Send Inquiry
You may like
_1781662034490.webp)